With which carriers/attachments can they be used?
Demolition and recycling attachments require a carrier to provide power and to move them into the working position. Attachment and carrier must be compatible. The adaptation between
them is performed by a coupler and the compatibility is largely determined by the type of quick coupler required.
The most common carriers and attachments used in demolition and recycling are shown in the two figures below.
However, for further information about this topic the guides about attachments and carriers elaborated by EDA can be consulted in the following link:
www.europeandemolition.org/library
It should be noted that, although all these attachments and carriers must be assembled by couplers, this guide focuses on quick couplers installed on excavators and similar equipment.
Although the main principles apply to the other carriers as well.
Links:
Access the full guide here:
Help us grow!
If you have any suggestions about these contents, find any error or would like to make us aware of anything, please fill out the form below.
